For a consumer printing about 50 pages per month, you will use 123.hp.com/oj3830 Printer. The type of printer is not a double-sided printing device, at the same time, the alternative cost of the printer is really high. It is suggested to use the instant ink supplier. The other fear of the printer is keeping an eye on the panel’s functionality.
123 HP Officejet 3830 printers unpacked
To begin the Hp Officejet 3830 setup procedure, proceed with the following. Take your printer out of the packaging. Remove the safety quilt from your printer. Place your printer where you can easily access it. Connect your 123.hp.com/oj3830 printers with the capacity thread. You can find the printer power slot on the back of the printer. There is an additional USB slot next to the installation slot. Then remove all packing material from the scanner glass and access the spaces. Get your ink cartridges at the side of your printer setup. You can configure your printer cartridges and start printing. To configure the cartridge, remove it from its packaging. Remove the plastic strip from the ink slot. Now open the printer cartridge to access the door, wait until the carriage seats in the middle of the printer. Place the cartridge in the carriage and push it in until it clicks on the sides. Now close the entrance to the doors and restart your printer.
Setting up the HP Officejet 3830 Printer
The first thing to do after purchasing a printer is to configure the printer properly. Make sure this is the first thing you do. There is usually a manual that comes with the printer when you buy it. This has the instructions that are given to follow in the configuration of the HP Officejet 3830 printer.
The process for setting up the HP Officejet 3830 printer is quite simple. This article largely covers most of the things you need to do as part of the setup process. A couple of things can be done as part of this, and the good thing is that the same person can do them too. The first thing you need to do is follow all the steps below and make sure they are followed correctly.
Steps to connect the HP OfficeJet 3830 printer to wireless settings
After doing all the general printer settings.
Go to the setup option on the printer panel.
Then proceed to the wireless wizard option on the printer.
It is always better to choose the wireless option than the wired network.
As the wired network can cause problems when connecting and produce a stable network.
Touch the wireless network option and wait until the printer finds your home router’s network.
Once the SSID of your home network is available from the list, select your router name and enter the password to connect the printer to the wireless network.
After the network is connected, you will receive the software update message on the printer panel.
To update the software, go to 123.hp.com/oj3830 and update the software.
Before starting the wireless setup for the HP OfficeJet 3830 printer, make sure you have completed the basic setup, such as connecting the printer to the power source, loading the paper and ink cartridge, completing the initial setup on the printer panel. HP officejet pro 3830 wireless setup is easy. and then the wireless settings. adjustment. After the wireless setup is complete, you need to navigate to 123 hp com/oj3830 and install the driver on the printer.
Conclusion
After following the above steps still, you have an issue in setup HP printer, so you can contact us any time to fix the “HP Officejet pro 3830 wireless setup” issue our expert technicians available 24*7 for your help. it’s best for you if you allow the remainder to our technical experts; they’re skilled enough to subdue any sort of issues together with your printer.